Easy Jtag Plus With eMMC Socket



Z3x Easy Jtag Plus Box – Full Version With eMMC Socket, which boasts some MAJOR hardware improvements and Features including One click device repair, Boot repair, Data recovery, eMMC firmware repair, Partition management, eMMC service operations, SPI memory programming.

This Upgraded PLUS version features ultra fast data transfer, has the possibility of increasing functionality in the future: hardware of the new box is ready to support new protocols like UFS* and NAND*.

Box Features

One click device repair
Boot repair
Data recovery
eMMC firmware repair
Partition management
eMMC service operations
SPI memory programming

Socket Features

Combining the top quality materials with best engineering and elegantly designed hardware for the powerful eMMC Socket.
Made from the high quality materials
Over 10K cycles of lifetime performance in your service center
Wide range of eMMC IC supported by: BGA153/169, BGA162/186, BGA221, BGA529
High-speed up to 30 MB per second over 8 bit bus.
EMI resistant design, low noise components
Integrated power logic. Additional power source is no more need
Surge protection – smart fuse driven (0.5A threshold)

Software Features


Free access to large dump and pinouts database and constantly updated software tools


The main application allowing you to use most of the product features. It’s the most powerful tool of all


Lightweight software, made especially for mobile phones repair, eMMC memory chips replacement and user data recovery


Identifying, reading, writing, verifying and erasing flash chips. It is designed to flash BIOS images on mainboards, routers, e.t.c.


Create user customized repair packages. This is partition layout, pinout, eMMC preconfig and instructions


Access to most useful box functionality to create your own decisions

Main benefits of new Z3x Easy Jtag Plus Box

Updated CPU AT SAM3X8E vs LPC1768 in old box.
Updated FPGA SPARTAN6 vs SPARTAN3 in old box
Updated Power Logic – Full Digital PWM with ADC control.
MicroUSB Connector if additional power required.
VCC and VCCQ overload protection.
Updated host interface: USB 2.0 Device/Mini Host: 480 Mbps
Integrated ISP engine: Z3X High Power Pro Engine
ISP Support 1 and 4 bit connection now **
Added eMMC 8 bit high speed interface up to 48Mhz
Integrated NAND engine: NFC with 4 Kbyte RAM buffer and ECC
Integrated M-PHY interface.
Integrated SPI/I2C engine: up to 65 MHz for HSMCI and SPI clock lines
Integrated Self Test Core that exclude 90% faults in production.
Integrated CCID Card Reader for Z3X Software Use

What you get with new hardware :

Box to Host PC speed increase up to 35MB/sec
JTAG Interface speed increase 20%
eMMC ISP Speed increase up to 4MB/sec
eMMC 8 Bit Speed up to 26MB/sec
Compatibility with 99.9 host PC systems and OSes
Compatibility with old Easy JTAG G1 ISP adapters ( 1bit )
Adapter-less ISP ( all stuff inside the box )
Compatibility with all market popular eMMC sockets ( 8 bit )
True Plug and Play for modern Windows OS ( 8, 8.1 , 10 )
Full Support for legacy OS like Windows XP

Z3x Easy JTAG Plus FULL PACKAGE Contents :

Easy JTAG Plus Box Main Interface Hardware
Z3X Smart Card with Easy JTAG Plus Activation
Z3X Certified EMMC Socket (BGA153/169, BGA162/186, BGA221, BGA529)
5 Piece Adapter Set

1xJTAG Pin 20 Standard Cable.
1xISP Soldering connector 1bit.
1xISP Soldering connector 4bit.
1x20P to 20P Adapter for E type Socket.
1x20P to 20P Adapter for U type Socket.

1 Year Free support access to our file support servers.
USB A to B Cable

* UFS and NAND protocols due to high speed connection rates requires special sockets and will be released in the future software and firmware releases.
** 4-BIT ISP technology is currently under testing and will be added in the future firmwares.

NOTE: We dont guide you how to use it make sure you know how to use it before buying it, however you can still find solution or help from official site or at https://www.martview-forum.com/forums/z3x-team.186/